This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
howto:nfzbypass [2018/05/07 06:13] jezzab [DON'T DO ANYTHING STUPID IF YOU PROCEED WITH NFZ UNLOCKING! If you do something STUPID like flying around airports or other aircraft etc, everyone involved in this project will do whatever we can to identify you and provide your info to the authorities! |
howto:nfzbypass [2019/03/06 22:53] (current) jmartincufre Added an alternative method to delete the nfz.db using ADB and root on Mavic 1 Pro. |
||
---|---|---|---|
Line 4: | Line 4: | ||
Feel free to contribute / update this material to expand on the details here. | Feel free to contribute / update this material to expand on the details here. | ||
+ | |||
+ | ===== NFZ Removal Tutorial ===== | ||
+ | |||
+ | How to fully remove NFZ from 4.1.22 GO and on your stock firmware drone WITHOUT mixing firmware. | ||
+ | **These instructions are for MAVIC only.** Coming soon for Spark,P4, I2. Stay tuned. | ||
+ | Following these steps will allow you almost the full monty. | ||
+ | |||
+ | Just to be clear, this project was undertaken to get around DJIs INCORRECT NFZ and Warning zones that they implemented without any legal obligation or requirement. | ||
+ | |||
+ | **DON' | ||
+ | |||
+ | Tools/ | ||
+ | * DUMLdore V3.03: | ||
+ | * Latest bin4ry/ | ||
+ | * https:// | ||
+ | * DDD – DankDrone Downloader - https:// | ||
+ | * Latest GO that is patchable: http:// | ||
+ | * Jezzabs stage2.bin file attached [[http:// | ||
+ | Without getting into the details of what jezzab has done for all of us…here is what you do: | ||
+ | - Use DDD and download 01.04.0100/ | ||
+ | - Use DUMLdore V3.03 and flash your Mavic to the firmware of your choice in #1. Stock. | ||
+ | - Flash it again, just to make sure, to the same version. | ||
+ | - Now, close DUMLdore . In the DUMLdore folder you will see the stage2.bin file. Rename this file so the program doesn’t use it. (Example, rename it to stage2original.bin) | ||
+ | - Start up DUMLdore. | ||
+ | - Don’t forget to rename the stage2.bin file back, or swap it out again. | ||
+ | - Man up and send jezzab some LOVE via PayPal. | ||
+ | Test in an area where you had NFZ warnings before, WITH PROPS OFF. I am NOT telling you to fly in a NFZ. Use your smarts. | ||
+ | |||
+ | |||
+ | ===== Another method (ADB and Root, tested with Mavic Pro 1.04.400 on Windows 10 x64) ===== | ||
+ | - Turn on your Mavic, connect via USB and wait for it to start up. | ||
+ | - Open DUMLdore (tested in version 3.20) and select " | ||
+ | - Open as administrator: | ||
+ | - Run, in order: | ||
+ | <code bash> | ||
+ | cd amt | ||
+ | rm -r nfz | ||
+ | exit | ||
+ | </ | ||
+ | - Restart your bird and test if the application asks you to update the FlySafe database. If it does, you're ready to go. Keep in mind that each update comes with its database built in, so **this method only works if the update you use corresponds to an NFZDB that does not contain locks for the area you want to fly**. | ||
+ | |||
+ | Note: If after the change the aircraft reports a firmware check error, simply flash the same version and the error will go away. | ||
+ | |||
+ | Big thanks to this post [[http:// | ||
+ | |||
===== Big switch ===== | ===== Big switch ===== | ||
Line 206: | Line 251: | ||
- h264 | - h264 | ||
</ | </ | ||
- | |||
- | ===== NFZ Removal Tutorial ===== | ||
- | |||
- | How to fully remove NFZ from 4.1.22 GO and on your stock firmware drone WITHOUT mixing firmware. | ||
- | These are instructions for MAVIC only for now. Coming soon for Spark,P4, I2. Stay tuned. | ||
- | Following these steps will allow you almost the full monty. | ||
- | |||
- | Just to be clear, this project was undertaken to get around DJIs INCORRECT NFZ and Warning zones that they implemented without any legal obligation or requirement. | ||
- | |||
- | ===== DON'T DO ANYTHING STUPID IF YOU PROCEED WITH NFZ UNLOCKING! If you do something STUPID like flying around airports or other aircraft etc, everyone involved in this project will do whatever we can to identify you and provide your info to the authorities! Do not TEST US! ===== | ||
- | |||
- | Tools/ | ||
- | * DUMLdore V3.03: | ||
- | * Latest bin4ry/ | ||
- | * https:// | ||
- | * DDD – DankDrone Downloader - https:// | ||
- | * Latest GO that is patchable: http:// | ||
- | * Jezzabs stage2.bin file attached [[https:// | ||
- | Without getting into the details of what jezzab has done for all of us…here is what you do: | ||
- | - Use DDD and download 01.04.0100/ | ||
- | - Use DUMLdore V3.03 and flash your Mavic to the firmware of your choice in #1. Stock. | ||
- | - Flash it again, just to make sure, to the same version. | ||
- | - Now, close DUMLdore . In the DUMLdore folder you will see the stage2.bin file. Rename this file so the program doesn’t use it. (Example, rename it to stage2original.bin) | ||
- | - Start up DUMLdore. | ||
- | - Don’t forget to rename the stage2.bin file back, or swap it out again. | ||
- | - Man up and send jezzab some LOVE via PayPal. | ||
- | Test in an area where you had NFZ warnings before, WITH PROPS OFF. I am NOT telling you to fly in a NFZ. Use your smarts. | ||
- | |||
- | ===== Credits ===== | ||
- | Material sourced from [[https:// |