User Tools

Site Tools


howto:dumldore

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
howto:dumldore [2017/07/22 00:19]
quad808 formatting
howto:dumldore [2018/01/19 16:50] (current)
digdat0 added mavic to unlock
Line 1: Line 1:
 ====== DUMLdore ====== ====== DUMLdore ======
-DUMLdore is a Windows app that can transfer firmware to/from a DJI product. Go to the GIT repository below to download and read detailed instructions+DUMLdore is a Windows app that can transfer firmware to/from a DJI product. You can download and read detailed instructions at the GIT repository [[https://github.com/jezzab/DUMLdore|here]]
  
-  * https://github.com/jezzab/DUMLdore+===== Compatible with =====
  
-Compatible with: +  * Aircraft: 
-Aircraft: P4P4 ProMavicSparkI2 +    * P4 
-Remote ControlMavic +    * P4 Pro 
-GogglesDJI+    * Mavic 
 +    * Spark 
 +    * I2 
 +  Remote Control 
 +    * Mavic 
 +    * Spark 
 +  * Goggles 
 +    * DJI
  
-DOWNLOAD THE ENTIRE ZIP FILE NOT JUST THE EXE+===== Using DUMLdore =====
  
 +As of 2.11 incorporates DUMLRacer to allow downgrading of Mavic FW 1.04.0100
 +
 +  * **DOWNLOAD THE ENTIRE ZIP FILE NOT JUST THE EXE**
 +  * Make sure you have at least 50% battery remaining before you begin
   * Make sure Assistant2 is not running   * Make sure Assistant2 is not running
-  * Turn on the aircraft/RC and allow it to fully start up - wait a bit before connecting to PC +  * Turn on your device (Aircraft Goggles) and allow it to fully start up before connecting to PC. (Wait about 30-60 seconds) 
-  * Plug in USB cable from the aircraft/RC to the PC - MAKE sure you are using a good DATA cable, NOT a phone charging cable +  * Plug in USB cable from the aircraft to the PC. Make sure you are using a good DATA cable, NOT a phone charging cable.  Power on the RC AFTER connecting it to the PC for it to be detected properly. 
- *note - Windows MUST detect the hardware.  If DUMLdore does NOT detect the Mavic, close DUMLdore, run Assistant and let Assistant detect the Mavic If Assistant DOES NOT detect the Mavic, DUMLdore will not work.  Once Assistant detecs the Mavic CLOSE assistant before running DUMLdore +  Start DUMLdore.exe 
-  +  * Confirm connectivity 
-Start DUMLdore.exe +    * If DUMLdore does NOT detect your device, close DUMLdore, run Assistant and let Assistant detect the device. 
- +    * If Assistant DOES NOT detect your device, DUMLdore will not work. 
-LOAD: Will load a firmware file to flash. Some error checking is done to make sure it is valid. It is not perfect and up to the user to make sure it is. +    * Once Assistant detects your device, CLOSE assistant before running DUMLdore 
- +  * **Using DUMLdore** 
-FLASH: Upload the firmware file to the device and begin the upgrade/downgrade. +    * **LOAD**: Will load a firmware file for flashing. Some error checking is done to make sure it is valid. It is not perfect and up to the user to make sure it is.  After pointing to the correct dji system.bin file, click on flash
- +    * **FLASH**Uploads the firmware file in the Load step to the device and begins the upgrade/downgrade.  Follow the prompts and DO NOT RUN ASSISTANT until you get the prompt that it is OK to do so
-BACKUP: Will make a flashable firmware backup of the currently connected device if applicable. It will save the dji_system.bin file into the current directory. It may take some time. Please be patient as the status may take a few moments to update on some of the files.+    * **BACKUP**: Will make a flashable firmware backup of the currently connected device if applicable. It will save the dji_system.bin file into the current directory. It may take some time. Please be patient as the status may take a few moments to update on some of the files. If you are making a backup of your aircraft and your remote controller, rename or move the 1st backup file into a folder before running the backup on the next device. 
 +    * **UNLOCK**: Will unlocked a grounded Spark OR Mavic due to not performing the firmware update. 
 +    * **ACTIVATE MAVIC**: Offline activation of Mavic 
 +===== Firmware =====
  
-*If you are making a backup of the Mavic and the RC, rename or move the 1st backup file into a folder before running the backup on another device.+You can see available firmware [[.:firmware|here]] or directly from [[https://github.com/MAVProxyUser/dji_system.bin|GIThub]]
  
-NOTE: Make sure you have atleast 50% battery remaining before you begin+===== Credits =====
  
-FIRMWARE FILES: https://github.com/MAVProxyUser/dji_system.bin 
  
 Thanks to hostile, the_lord, p0v and many others for the information :) Thanks to hostile, the_lord, p0v and many others for the information :)
  
 -jezzab (copied from his Git, with additions) -jezzab (copied from his Git, with additions)
howto/dumldore.1500682795.txt.gz · Last modified: 2017/07/22 00:19 by quad808