Differences

This shows you the differences between two versions of the page.

--- howto:dji_configs [2018/01/29 17:39]
lukappaseidue [Supported Versions]
+++ howto:dji_configs [2018/06/14 17:34]
beanbubba [Detailed Video Tutorial]
@@ Line 5: / Line 5: @@
 The DJI Configs file mod will work on both Android and iOS.
-Laws in the United States allow transmit power of 0.5W for radio transmission on the frequencies used by DJI aircraft. In other parts of the world, CE restrictions permit 0.025W. Outside the United States, DJI equipment uses a power output of ~0.009W by default which is pretty weak. The equipment can be configured to a maximum of 1.5 Watts of TX power.
+The maximum power at which consumer products can transmit on the 2.4Ghz wifi frequency used by DJI aircraft is 0.1 watts (0.1W) in many countries. In a minority of countries, including the U.S. it is 1W.  Some countries lie in between. Only one country, India, allows more than 1W (In India, the max is 4W!).  In most parts of the world DJI aircraft uses a power output of 0.1W by default, which is pretty weak.  In the U.S., it uses 0.4W. However, the equipment can be configured to a maximum of 1.5 Watts of TX power anywhere in the world with the directions below.
-If you are not in the USA and you want to increase the power level, follow the directions below.
 ===== iOS Warnings =====
@@ Line 54: / Line 51: @@
 Well, one mavic at a distance of about 3800 meters had WEAK SIGNAL and activated the automatic RTH, the other, continued to fly and at a distance of about 4500 meters it had 4 receive notches on the total of 5 in both the controller and in HD. (test stopped because no need to go further)
+**UPDATE!!!!
+**It seems that .DJI.configs file is working until  DJI GO V4 4.1.12 (iOS version) and DJI GO V4 4.1.10.
+With newer versions  the .DJI.configs file seem that it is not working.****
+Here the REAL test showing that .DJI.configs is really working (**thanks to @GabrieleFK14** for hardware testing)
+**CE MODE**
+https://postimg.org/image/3y11dge9f/
+**
+FCC 1.5w BOOST MODE (TAKE CARE)**
+https://s13.postimg.org/3l9n7blpz/FCC_Boost_Mode_1.5w.jpg
+how it has tested
+https://drive.google.com/open?id=1YW47GcpA3hDWGiqj6x2mIJWWKR_XpbtD
+(By Lukappaseidue)
@@ Line 90: / Line 108: @@
 |32 Channel Mod |            |{{ :howto:dji.configs_32-ch_mod |}}|P3P, P3A, P4P|
 |FCC+ChannelMod |            |{{ :howto:dji.configs_force_fcc_32-ch_mod|}}|Experimental|
+===== Spectrum Analyzer Observations =====
+Extensive testing of the mod's with a spectrum analyzer in this video by beanbubba. You can find more of his testing at https://mavicpilots.com/threads/mavic-radio-mods-primer.34444/
+{{youtube>5uecdm0lWcE}}
 ===== Detailed Video Tutorial =====
 This tutorial was created by digdat0. He has many tutorials on [[https://flyflydrones.com/ |his website]]
 {{youtube>OxpsdW9zY2E}}
 ===== Hex Dumps =====

User Tools

Site Tools

Differences

Page Tools