User Tools

Site Tools


howto:mcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
howto:mcc [2018/02/25 15:38]
knarfboy
howto:mcc [2018/02/25 15:46]
knarfboy
Line 33: Line 33:
 c.) Insert the previously supplied US SIM card into the smartphone (enter pin). c.) Insert the previously supplied US SIM card into the smartphone (enter pin).
  
-d.) Start up the system copter remote and Smartphone with the original GoApp. Since the system has neither GPS nor W-LAN for location determination, the MCC number of the US SIM card is used. The copter will now switch to FCC and this will be saved.+d.) Start up the system copterremote and Smartphone with the original GoApp. Since the system has neither GPS nor W-LAN for location determination, the MCC number of the US SIM card is used. The copter will now switch to FCC and this will be saved.
  
 e.) Well, as long as the GoApp is not used again, you can fly with Litchi in FCC mode. e.) Well, as long as the GoApp is not used again, you can fly with Litchi in FCC mode.
  
 Note: It's possible, do it with a borrowed Android device and modded GoApp. Then use Litchi only at iOS Note: It's possible, do it with a borrowed Android device and modded GoApp. Then use Litchi only at iOS
 +
 +source: kopter-support.de
  
howto/mcc.txt ยท Last modified: 2018/03/07 16:17 by knarfboy