Differences

This shows you the differences between two versions of the page.

--- howto:modulemix [2018/06/08 23:29]
digdat0 [6. Modify parameters]
+++ howto:modulemix [2018/06/08 23:29]
digdat0 [4. Install tweakable version]
@@ Line 38: / Line 38: @@
 ==== 4. Install tweakable version ====
 Start by installing a **tweakable** firmware file on your aircraft using [[https://github.com/jezzab/DUMLdore/releases|Dumldore (windows)]] or [[https://github.com/CunningLogic/DUMLFlasher|dumlflasher (win/Mac)]], then simply flash like normal. If you are jumping from the latest firmare version (say 1.04.0300) down to 1.03.0700, the update may stop at 82%. If that happens, give it time. It should then jump to 100%. If that happens, you will need to flash a second time to finish the rest of the update.
-After flashing, you can modify the parameters. The only parameter which will be affected by the next update is the battery settings, all other parameter mods will remain.
 Note: More recent versions of firmware (Mavic 1.04.0000+) will require the [[https://github.com/CunningLogic/DUMLRacer|dumlracer tool (Windows and Mac)]] to be ran. This applies to Inspire 2, Phantom 4 and Phantom 4 Pro as well.