This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
howto:modulemix [2018/06/12 01:53] digdat0 [2. Install 7-zip] |
howto:modulemix [2019/05/25 10:09] (current) henfri Remark regarding SD Card |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Firmware Module Mixing ====== | ====== Firmware Module Mixing ====== | ||
- | DJI firmware contains multiple modules for different functions. For example one for the camera, one for the ESCs, one for the flight controller and so on. The important one is the flight controller module(s) because the modified parameters are stored and used within this part of firmware. These are modules 305 and 306. | + | DJI firmware contains multiple modules for different functions. For example one for the camera, one for the ESCs, one for the flight controller and so on. The important one is the flight controller module(s) because the modified parameters are stored and used within this part of firmware. These are modules 305 and 306. For the Noflyzone it is module 905. |
+ | The mixing of the Firmware seems not possible anymore with Firmware V01.04.0400 and higher. It will lead to Error 200 which will prevent take-off. Stick to V01.04.0300 as bin file to delete the modules from. | ||
+ | For downgrading a Mavic Pro to 1.03.0700, it requires the internal SD Card to be installed, which is not the case for newer versions of the Mavic. As a rule of thumb, one can say, that if your Mavic was delivered with a Version newer than 1.03.0700 (e.g. 1.03.1000), no internal SD Card is installed. This can only be fixed by a [[howto: | ||
DJI have made changes that prevent parameter changes in some of their recent firmware. To get all benefits from more recent firmware, without the downside of losing parameter changes, you will need to delete modules from recent firmware. | DJI have made changes that prevent parameter changes in some of their recent firmware. To get all benefits from more recent firmware, without the downside of losing parameter changes, you will need to delete modules from recent firmware. | ||
Line 43: | Line 45: | ||
Start by installing a **tweakable** firmware file on your aircraft using [[https:// | Start by installing a **tweakable** firmware file on your aircraft using [[https:// | ||
- | Note: More recent versions of firmware (Mavic 1.04.0000+) will require the [[https:// | + | Note: More recent versions of firmware (Mavic 1.04.0000+) will require |
+ | This step may require you to change your network settings according to this screenshot: | ||
+ | {{: | ||
CAUTION - when flashing with modded .bin files and monitoring progress with Assistant, you may get a firmware failed message. | CAUTION - when flashing with modded .bin files and monitoring progress with Assistant, you may get a firmware failed message. |